Multirotors * | Iflight Blitz Mini F7 V1.1 Flight Controller

Top Features:

Improved Circuit Design, Better Components And Lower Electrical Noise!

Dji Hd Vtx Connector (Plug-And-Play / No Soldering Required)

Fc Indicator Leds For Visual Debugging

Changelog:

2022/Feb: Version Updated To V1.1 / Gyro Changed To Bosch Bmi270 Due To Availability & Price Issues With Mpu6000.

Specifications:

Mcu: Stm32 F722

Gyro: Bmi270

Barometer: Dps310

Osd Chip: At7456

Flash: 16Mb (Blackbox Flash)

Uarts: 6

Motor Outputs: 4X (Sh1.0 Connector)

I2C Serial: Sda / Sla Pads

Smartaudio / Irc Tramp Vtx Protocol Supported

Led Controller: Yes

Beeper Pad: Yes

Firmware Target: Ifrc-Iflight_Blitz_F722

Mount Pattern: 20 20 Mm / 4Mm Pcb Hole Diameter, Silicon Grommets For M3 Screws

Dimensions: 30.5 27 Mm

Weight: 5G

Wiring Suggestion:

Uart 1 For Vtx Hd / Analog

Uart 2 For A Receiver

Uart 3/4/5 For Gps Or Other Sensors That Require A Serial Port

Uart 6 For Esc Telemetry

Tips

1. F722 Mcu Has An Inner Inverter.

2. Sbus?Crsf?Elrs?Ibus?Dsm Etc… Can Be Connected To Any Unused Uart_Rx?We Suggest You Connect To Uart_Rx2

3. Frsky Smartport?Tramp & Smartaudio Can Be Connected To Any Unused Uart_Tx?We Suggest You Connect To Uart_Tx1

4. F.Port Can Be Connected To Any Unused Uart_Tx?We Suggest You Connect To Uart_Tx2

Included Connectors (Plug-And-Play Wire Harness):

1X Sh1.0 9Pin Connector For Hd Vtx/Analog Vtx&Cam ?5V/Bat/G/Vo/T1/R1/5V/G/Vi?

1X Sh1.0 8Pin Connector For Esc?R6/Cur/M4/M3/M2/M1/Bat/G)

1X Sh1.0 6Pin Connector For Any Receiver Or Dji?3V3/R2I/5V/G/R2/T2?

1X Sh1.0 4Pin Connector Gps (T4/R4/G/5V)

1X Sh1.0 4Pin Connector Led & Beeper (Buz/Led/G/5V)

What’S In The Package?

1 X Blitz Mini F7 V1.1 Flight Controller

1 Set Of Fc Connectors (As Above)

1 Set Silicon Grommets