Multirotors * | Iflight Blitz Mini F7 Stack (Mini F7 V1.1 + 55A 4In1 Esc)

Fc // Blitz Mini F7 V1.1 Flight Controller

Top Features:

Improved Circuit Design, Better Components And Lower Electrical Noise!

Dji Hd Vtx Connector (Plug-And-Play / No Soldering Required)

Fc Indicator Leds For Visual Debugging

Changelog:

2022/Feb: Version Updated To V1.1 / Gyro Changed To Bosch Bmi270 Due To Availability & Price Issues With Mpu6000.

Specs:

Mcu: Stm32 F722

Gyro: Bmi270

Barometer: Dps310

Osd Chip: At7456

Flash: 16Mb (Blackbox Flash)

Uarts: 6

Motor Outputs: 4X (Sh1.0 Connector)

I2C Serial: Sda / Sla Pads

Smartaudio / Irc Tramp Vtx Protocol Supported

Led Controller: Yes

Beeper Pad: Yes

Firmware Target: Ifrc-Iflight_Blitz_F722

Mount Pattern: 20X20 Mm / 4Mm Pcb Hole Diameter, Silicon Grommets For M3 Screws

Dimensions: 30.5X27 Mm

Weight: 5G

Wiring Suggestion:

Uart 1 For Vtx Hd / Analog

Uart 2 For A Receiver

Uart 3/4/5 For Gps Or Other Sensors That Require A Serial Port

Uart 6 For Esc Telemetry

Tips

1. F722 Mcu Has An Inner Inverter.

2. Sbus, Crsf, Elrs, Ibus, Dsm Etc… Can Be Connected To Any Unused Uart_Rx, We Suggest You Connect To Uart_Rx2

3. Frsky Smartport, Tramp & Smartaudio Can Be Connected To Any Unused Uart_Tx, We Suggest You Connect To Uart_Tx1

4. F.Port Can Be Connected To Any Unused Uart_Tx, We Suggest You Connect To Uart_Tx2

Esc // Blitz Mini E55 4-In-1 2-6S Esc

Specification:

Dimension: 35*42Mm

Mounting Holes: 20*20Mm/?4Mm

Weight: 11.3G

Supports 2-6S Lipo Input

Mcu? G071

Constant: 55 Amps

Burst: 60 Amps

Current Sensor: Yes

Bec: No

Current Rate: 100

Supports: Dshot Dshot150/300/600/Multishot/ Oneshot Etc.

Firmware: Blheli 32

Target: Iflight_Blitz_G1

Package Included:

1Pc X Blitz Mini F7 V1.1 Flight Controller

1Pc X Blitz Mini E55 4-In-1 2-6S Esc

1Set X Silicon Grommets

1Set X Wire Harness For F7 Flight Controller