Multirotors * | Geprc Gep-20A-F4 Aio

Strong Performance, Cont.Current 20A, Burst Current 30A

Blhelis_S 20A, Maximum Support 4S Battery,Built-In Current Sensor

Compatible With 12Xx-15Xx Motor Installation, With 3?-5? Size Propeller

Stm32F411 Flight Control, Super-High Running Frequency

Mpu6000 Gyroscope

External Buzzer : Support

Led Control : Support



Designed With Silica Gel Shock Absorbing Column, It Can Reduce The High Frequency Vibration Caused By Frame And Motor, Allowing The Flight Control To Operate In A Noiseless Environment
The Overall Weight Is About 7.3G

The New High Performance Aio Brushless Fc, Gep-20A-F4 Was Added To The Toothpick Drone

Compared With The Previous 12A Version, The New Gep-20A-F4 Can Achieve A Continuous Current Of 20A And A Burst Current Of 30A.Maximum 4S Battery Support, Recommended To Use 12Xx-15Xx Motor, With 3?-5? Size Blade.This Gep-20A-F4 Has Strong Flight Performance, Osd Input, Extremely Light Weight, Let Your New Toothpick To Build A Higher Flight Performance Through The Aircraft.

Specifications:

Model Name:Gep-20A-F4

Mcu: Stm32F411

Imu: Mpu6000 Gyro/Accelerometer (Spi)

Fc Firmware Target:Matekf411

Osd: Betaflight Osd W/ At7456E Chip

Baro:No

Current Monitoring : Support

Betaflight Osd : Support

External Buzzer : Support

Led : Support

Usb Port: Microusb

Bec Output: 5V@1A

Integrated Lc Filter

Esc Mcu: 8Bb21F16G

Continuous Current: 20A

Peak Current: 30A

Input Voltage:2-4S Lipo

Supports Dshot600 ,Oneshot,Multishot

Current Meter: 210

Target: G_H_30

Size: 32X32Mm Board,26.5Mm Mounting Holes (M2)

Installing Hole: 26.5 26.5Mm, M2

Receiver Support:

Frsky Xm/Xm+/R-Xsr

Futaba Receiver

Dsm/Dsmx

Flysky Receive

Tbs Crossfire Receiver

Ac900

Most Receivers That Support Sbus

Feature:

Strong Performance, Cont.Current 20A, Burst Current 30A

Blhelis_S 20A, Maximum Support 4S Battery,Built-In Current Sensor

Compatible With 12Xx-15Xx Motor Installation, With 3?-5? Size Propeller

Stm32F411 Flight Control, Super-High Running Frequency

Mpu6000 Gyroscope

External Buzzer : Support

Led Control : Support

Designed With Silica Gel Shock Absorbing Column, It Can Reduce The High Frequency Vibration Caused By Frame And Motor, Allowing The Flight Control To Operate In A Noiseless Environment

The Overall Weight Is About 7.3G

Manual.Pdf

Include?

1 X Gep-20A-F4

1 X Power Cable

8 X Screw

4 X Soft Silicone